LUX - single purpose machines, assembly lines and automation

The Machine rivets the roller together with the rail of the window regulator with the help of stepped rivets. The rail is inserted manually, loading of rivets and rollers are done automatically.

The station screws the rubber silent block to the cover of the drum. The station greases the cover onto the place where the drum is put.

The station winds the two cables onto the drum. This station automatically greases the cables.

The station screws up the cover to the motor of the window regulator and than the operator tests the right number of the screws and the prescribed screws height in the cover.

The operator mounts the spring into the metal body and greases it. Than the operator assembles the parts of the winding drum manually. The toy-taps of the metal body are bended under the press.

The operator feeds the cables to the rail, assembles the lifter plates and bumpers on the rail. The operator completes the final assembly.

Testing and Sequence as follows

• Apply manually bar on lifter plates
• Full down position
• Apply load automatically
• Full up position
• Check Stall force up, amperage at stall
• Verify full up position
• Check Amperage Peak
• Check medium Amperage
• Full down position
• Verify full down position
• Remove weight
• Drive to shipping position
• Check lifter plates alignment
• Print label